Can't run enable in playbookHow to debug “ERROR! Unexpected Exception: Non-hexadecimal digit found” in Ansible and Vagrant?Using Ansible to run sudo /bin/su - usernameusing 'supervisorctl' in ansible playbook; Error “Failed to find executable supervisorctl”Ansible playbook: Requires sudo passwordAnsible: winrm timeout issues running vsphere_guestgoogle cloud - permission denied when running dynamic inventory through ansibleAnsible vaulted variables with quotes in itAnsible playbook, what is the proper syntax to run a powershell script with a specific (domain) user, in an elevated mode?Ansible fortios_config backups not working
On a tidally locked planet, would time be quantized?
Terse Method to Swap Lowest for Highest?
Is there a RAID 0 Equivalent for RAM?
Quoting Keynes in a lecture
Does the Linux kernel need a file system to run?
What exact color does ozone gas have?
Open a doc from terminal, but not by its name
Picking the different solutions to the time independent Schrodinger eqaution
Does IPv6 have similar concept of network mask?
What are some good ways to treat frozen vegetables such that they behave like fresh vegetables when stir frying them?
Recommended PCB layout understanding - ADM2572 datasheet
Fear of getting stuck on one programming language / technology that is not used in my country
Extract more than nine arguments that occur periodically in a sentence to use in macros in order to typset
PTIJ: Haman's bad computer
Yosemite Fire Rings - What to Expect?
Why can Carol Danvers change her suit colours in the first place?
Unexpected behavior of the procedure `Area` on the object 'Polygon'
Is aluminum electrical wire used on aircraft?
15% tax on $7.5k earnings. Is that right?
Calculating total slots
Is this toilet slogan correct usage of the English language?
What if a revenant (monster) gains fire resistance?
Using substitution ciphers to generate new alphabets in a novel
It grows, but water kills it
Can't run enable in playbook
How to debug “ERROR! Unexpected Exception: Non-hexadecimal digit found” in Ansible and Vagrant?Using Ansible to run sudo /bin/su - usernameusing 'supervisorctl' in ansible playbook; Error “Failed to find executable supervisorctl”Ansible playbook: Requires sudo passwordAnsible: winrm timeout issues running vsphere_guestgoogle cloud - permission denied when running dynamic inventory through ansibleAnsible vaulted variables with quotes in itAnsible playbook, what is the proper syntax to run a powershell script with a specific (domain) user, in an elevated mode?Ansible fortios_config backups not working
I am currently running ansible 2.7 and I have the following playbook
info.yaml
---
- hosts: routers
gather_facts: true
tasks:
- name: show run
ios_command:
commands:
- show running-config
register: config
I have the following inventory file:
[local]
127.0.0.1 ansible_connection=local
[routers]
LAB-RTR-1
LAB-RTR-2
[routers:vars]
ansible_ssh_user= cisco_user
ansible_ssh_pass= cisco_pass
ansible_network_os=ios
ansible_connection=network_cli
ansible_become = yes
ansible_become_method = enable
anisble_become_pass = auth_pass
Have the following in the vault
cisco_user: “admin”
cisco_pass: “password123”
auth_pass: “password123”
When i try to run this via cli like this:
ansible-playbook info.yaml --ask-vault-pass -vvv
I keep getting the following errors for some reason, and i can’t figure this out. I’ve been going crazy on this for the last few hours
The full traceback is:
Traceback (most recent call last):
File "/usr/bin/ansible-connection", line 106, in start
self.connection._connect()
File "/usr/lib/python2.7/site-packages/ansible/plugins/connection/network_cli.py", line 341, in _connect
self._terminal.on_become(passwd=auth_pass)
File "/usr/lib/python2.7/site-packages/ansible/plugins/terminal/ios.py", line 78, in on_become
raise AnsibleConnectionFailure('unable to elevate privilege to enable mode, at prompt [%s] with error: %s' % (prompt, e.message))
AnsibleConnectionFailure: unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable
fatal: [LAB-RTR-1]: FAILED! =>
"msg": "unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable"
ansible ansible-2.x
asked Mar 8 at 2:07
Mr39Mr39
134
add a comment |
I am currently running ansible 2.7 and I have the following playbook
info.yaml
---
- hosts: routers
gather_facts: true
tasks:
- name: show run
ios_command:
commands:
- show running-config
register: config
I have the following inventory file:
[local]
127.0.0.1 ansible_connection=local
[routers]
LAB-RTR-1
LAB-RTR-2
[routers:vars]
ansible_ssh_user= cisco_user
ansible_ssh_pass= cisco_pass
ansible_network_os=ios
ansible_connection=network_cli
ansible_become = yes
ansible_become_method = enable
anisble_become_pass = auth_pass
Have the following in the vault
cisco_user: “admin”
cisco_pass: “password123”
auth_pass: “password123”
When i try to run this via cli like this:
ansible-playbook info.yaml --ask-vault-pass -vvv
I keep getting the following errors for some reason, and i can’t figure this out. I’ve been going crazy on this for the last few hours
The full traceback is:
Traceback (most recent call last):
File "/usr/bin/ansible-connection", line 106, in start
self.connection._connect()
File "/usr/lib/python2.7/site-packages/ansible/plugins/connection/network_cli.py", line 341, in _connect
self._terminal.on_become(passwd=auth_pass)
File "/usr/lib/python2.7/site-packages/ansible/plugins/terminal/ios.py", line 78, in on_become
raise AnsibleConnectionFailure('unable to elevate privilege to enable mode, at prompt [%s] with error: %s' % (prompt, e.message))
AnsibleConnectionFailure: unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable
fatal: [LAB-RTR-1]: FAILED! =>
"msg": "unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable"
ansible ansible-2.x
asked Mar 8 at 2:07
Mr39Mr39
134
add a comment |
I am currently running ansible 2.7 and I have the following playbook
info.yaml
---
- hosts: routers
gather_facts: true
tasks:
- name: show run
ios_command:
commands:
- show running-config
register: config
I have the following inventory file:
[local]
127.0.0.1 ansible_connection=local
[routers]
LAB-RTR-1
LAB-RTR-2
[routers:vars]
ansible_ssh_user= cisco_user
ansible_ssh_pass= cisco_pass
ansible_network_os=ios
ansible_connection=network_cli
ansible_become = yes
ansible_become_method = enable
anisble_become_pass = auth_pass
Have the following in the vault
cisco_user: “admin”
cisco_pass: “password123”
auth_pass: “password123”
When i try to run this via cli like this:
ansible-playbook info.yaml --ask-vault-pass -vvv
I keep getting the following errors for some reason, and i can’t figure this out. I’ve been going crazy on this for the last few hours
The full traceback is:
Traceback (most recent call last):
File "/usr/bin/ansible-connection", line 106, in start
self.connection._connect()
File "/usr/lib/python2.7/site-packages/ansible/plugins/connection/network_cli.py", line 341, in _connect
self._terminal.on_become(passwd=auth_pass)
File "/usr/lib/python2.7/site-packages/ansible/plugins/terminal/ios.py", line 78, in on_become
raise AnsibleConnectionFailure('unable to elevate privilege to enable mode, at prompt [%s] with error: %s' % (prompt, e.message))
AnsibleConnectionFailure: unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable
fatal: [LAB-RTR-1]: FAILED! =>
"msg": "unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable"
ansible ansible-2.x
asked Mar 8 at 2:07
Mr39Mr39
134
I am currently running ansible 2.7 and I have the following playbook
info.yaml
---
- hosts: routers
gather_facts: true
tasks:
- name: show run
ios_command:
commands:
- show running-config
register: config
I have the following inventory file:
[local]
127.0.0.1 ansible_connection=local
[routers]
LAB-RTR-1
LAB-RTR-2
[routers:vars]
ansible_ssh_user= cisco_user
ansible_ssh_pass= cisco_pass
ansible_network_os=ios
ansible_connection=network_cli
ansible_become = yes
ansible_become_method = enable
anisble_become_pass = auth_pass
Have the following in the vault
cisco_user: “admin”
cisco_pass: “password123”
auth_pass: “password123”
When i try to run this via cli like this:
ansible-playbook info.yaml --ask-vault-pass -vvv
I keep getting the following errors for some reason, and i can’t figure this out. I’ve been going crazy on this for the last few hours
The full traceback is:
Traceback (most recent call last):
File "/usr/bin/ansible-connection", line 106, in start
self.connection._connect()
File "/usr/lib/python2.7/site-packages/ansible/plugins/connection/network_cli.py", line 341, in _connect
self._terminal.on_become(passwd=auth_pass)
File "/usr/lib/python2.7/site-packages/ansible/plugins/terminal/ios.py", line 78, in on_become
raise AnsibleConnectionFailure('unable to elevate privilege to enable mode, at prompt [%s] with error: %s' % (prompt, e.message))
AnsibleConnectionFailure: unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable
fatal: [LAB-RTR-1]: FAILED! =>
"msg": "unable to elevate privilege to enable mode, at prompt [None] with error: timeout value 10 seconds reached while trying to send command: enable"
ansible ansible-2.x
ansible ansible-2.x
asked Mar 8 at 2:07
Mr39Mr39
134
asked Mar 8 at 2:07
Mr39Mr39
134
asked Mar 8 at 2:07
Mr39Mr39
134
asked Mar 8 at 2:07
Mr39Mr39
134
asked Mar 8 at 2:07
Mr39Mr39
134
134
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Haven't used ansible in a while (but the above looks ok to me), and never with cisco, but I found an open issue that looks very similar to yours which you may want to keep an eye on:
https://github.com/ansible/ansible/issues/51436
answered Mar 8 at 15:04
hhamihhami
112
Yes thank you, i have been watching that, but nothing has been solved yet. I would think this would kind of be a priority since everyone who uses ansible connects to some type of cisco devices
– Mr39
Mar 8 at 21:06
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
StackExchange.using("externalEditor", function ()
StackExchange.using("snippets", function ()
StackExchange.snippets.init();
);
);
, "code-snippets");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "1"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f55055732%2fcant-run-enable-in-playbook%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Haven't used ansible in a while (but the above looks ok to me), and never with cisco, but I found an open issue that looks very similar to yours which you may want to keep an eye on:
https://github.com/ansible/ansible/issues/51436
answered Mar 8 at 15:04
hhamihhami
112
Yes thank you, i have been watching that, but nothing has been solved yet. I would think this would kind of be a priority since everyone who uses ansible connects to some type of cisco devices
– Mr39
Mar 8 at 21:06
add a comment |
Haven't used ansible in a while (but the above looks ok to me), and never with cisco, but I found an open issue that looks very similar to yours which you may want to keep an eye on:
https://github.com/ansible/ansible/issues/51436
answered Mar 8 at 15:04
hhamihhami
112
Yes thank you, i have been watching that, but nothing has been solved yet. I would think this would kind of be a priority since everyone who uses ansible connects to some type of cisco devices
– Mr39
Mar 8 at 21:06
add a comment |
Haven't used ansible in a while (but the above looks ok to me), and never with cisco, but I found an open issue that looks very similar to yours which you may want to keep an eye on:
https://github.com/ansible/ansible/issues/51436
answered Mar 8 at 15:04
hhamihhami
112
Haven't used ansible in a while (but the above looks ok to me), and never with cisco, but I found an open issue that looks very similar to yours which you may want to keep an eye on:
https://github.com/ansible/ansible/issues/51436
answered Mar 8 at 15:04
hhamihhami
112
answered Mar 8 at 15:04
hhamihhami
112
answered Mar 8 at 15:04
hhamihhami
112
answered Mar 8 at 15:04
hhamihhami
112
112
Yes thank you, i have been watching that, but nothing has been solved yet. I would think this would kind of be a priority since everyone who uses ansible connects to some type of cisco devices
– Mr39
Mar 8 at 21:06
add a comment |
Yes thank you, i have been watching that, but nothing has been solved yet. I would think this would kind of be a priority since everyone who uses ansible connects to some type of cisco devices
– Mr39
Mar 8 at 21:06
Yes thank you, i have been watching that, but nothing has been solved yet. I would think this would kind of be a priority since everyone who uses ansible connects to some type of cisco devices
– Mr39
Mar 8 at 21:06
Yes thank you, i have been watching that, but nothing has been solved yet. I would think this would kind of be a priority since everyone who uses ansible connects to some type of cisco devices
– Mr39
Mar 8 at 21:06
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f55055732%2fcant-run-enable-in-playbook%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
